Brand : Samsung Adapter
Type : GSB469
Capacity : 100-240V 50-60Hz 1.2A
Voltage : 19V 3.11A 59W
Encoding : SAM17810_Altri

BN44-01014A Alternate with the following models：

BN44-01014A, A5919_RDY

The product Samsung BN44-01014A is perfectly compatible with the product model Samsung HW-S60T HW-S61T S-Series Bluetooth Smart Speaker Soundbar :

Samsung HW-S60T HW-S61T S-Series Bluetooth Smart Speaker Soundbar
Samsung HW-Q800T HW-Q800T/ZA HW-Q800T/EN
Cord Cable: US/ UK/ EU/ AU plug

FR : Adaptateur pour ordinateur portable Samsung BN44-01014A
PL : Wybierz Samsung BN44-01014A Adapter
NZ : Choose to buy an Samsung BN44-01014A adapter
US : Buy Samsung BN44-01014A Adapters in our store

http://pc-laptop.co/samsung-power_supply-BN44-01014A-p182356.htm

Maintenance and instructions for the Samsung BN44-01014A adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.
2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.