Brand : Leica Adapter
Type :
Capacity : 100-240VAC 50-60HZ 0.45A (for worldwide use)
Voltage : DC12.0V 1.5A
Encoding : ECN12286_AD_Altri

GKL311 Alternate with the following models：

GEB211/GEB212/GEB221/GEB222/GEB241/GEB242/GEB331

The product Leica GKL311 is perfectly compatible with the product model Leica Total Station GEB211 GEB212 GEB221 GEB222 GEB241 GEB242 GEB331 :

GKL311 Charger for Leica Total Station GEB211 GEB212 GEB221 GEB222 GEB241 GEB242 GEB331 battery
GEB211/GEB212/GEB221/GEB222/GEB241/GEB242/GEB331
1 X GKL311 AC Adapter
1X Car charger
With US/ UK/ EU plug

FR : Adaptateur pour ordinateur portable Leica GKL311
PL : Wybierz Leica GKL311 Adapter
NZ : Choose to buy an Leica GKL311 adapter
US : Buy Leica GKL311 Adapters in our store

http://pc-laptop.co/leica-power_supply-GKL311-p182608.htm

Maintenance and instructions for the Leica GKL311 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.
2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.