Brand : FORTINET Adapter
Type : GSB400
Capacity : 100-240Vac.1.5A 50-60Hz
Voltage : 12V 3A 36W
Encoding : FOR17845_1_Altri

FSP036-RBBN2 Alternate with the following models：

FSP036-RAB FSP036-RBBN2

The product FORTINET FSP036-RBBN2 is perfectly compatible with the product model Fortinet FG-50E FG-30E FG-90D :

2Pin 12V 3A 36W FSP036-RAB Adapter For Fortinet FG-60C FG-60D FG-60E

2Pin 12V 3A 36W FSP036-RBBN2 Charger for Fortinet FG-50E FG-30E FG-90D

Switching Power Adapter
MODEL NO : FSP036-RAB
AC INPUT : 100-240Vac.1.5A 50-60Hz
DC OUTPUT : 12V 3A 36W
Connector size: 2Pin with pin inside(ref to the picture)
Part Numbers: FSP036-RAB FSP036-RBBN2
Compatible Models :
For Fortinet FG-60C FG-60D FG-60E FG-50E FG-30E FG-90D

FR : Adaptateur pour ordinateur portable FORTINET FSP036-RBBN2
PL : Wybierz FORTINET FSP036-RBBN2 Adapter
NZ : Choose to buy an FORTINET FSP036-RBBN2 adapter
US : Buy FORTINET FSP036-RBBN2 Adapters in our store

http://pc-laptop.co/fortinet-power_supply-FSP036-RBBN2-p186715.htm

Maintenance and instructions for the FORTINET FSP036-RBBN2 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.
2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.